Beverage filling machine is used to fill a variety of liquid beverages, because the filling of the liquid, so filling machine containers must be kept clean, the use of filling containers must undergo a rigorous inspection and cleaning, can not make filling Drinks are contaminated.
In addition to the filling machine cleaning, keep the filling workshop clean and tidy is also very necessary. Because the most taboo in the production process due to the quality of the filling machine itself can not cause the normal operation of the production line, so the use of filling machine should pay attention to sterilization, to ensure clean, low temperature filling.
Keep the beverage filling machine pipeline clean, all pipes, especially with the material indirect or direct contact with the pipeline, should be kept clean.
Every shift of production shall carry out an overall clean of machine and the inspection of the fixing parts to ensure no looseness either at beginning or at the end.
If the meshing of gears is not satisfactory the remedy work shall be carried out and lubricate the gears with grease at last.
When the seasonal production is finished or any temporal stop of production happens in a year, an overhaul shall be carried out and the wearing-and-tearing parts should be replaced ensuring the satisfactory production of next term.
Notes:
1) When cleaning, forbid any water spray over rotating or electrical parts;
2) Bottles and caps shall accord with technical requirement and any discord ones shall be forbidden to be applied lest causing mechanical failure;
3) Each interconnecting of drive-and-driven pairs shall be precisely adjusted lest any bottle-blocking will occur;
4) Regular inspection of lubrication spots and ensuring satisfactory lubrication.
